Skip to content
Home > Products > Pro AV > TAD - Prof. Speakers
The ET-703 is a compression horn super high-frequency loudspeaker designed for a wide frequency range and high input power. This makes the driver especially suitable for monitoring digital sound.VOICE COIL The voice coil is formed by edgewise-wound pure aluminum wire coated with a thin film of alumite, in order to make the most of the magnetic circuit's high magnetic flux.
More details
The TD-2001 is designed to an exceptionally wide frequency range of 500 to 22,000Hz, high efficiency and high dependability.DIAPHRAGM A pure beryllium diaphragm is employed in the TD-2001. This diaphragm ensures rapid sound wave transmission, extremely flat frequency response, little cone breakup, excellent transient response and high sound image definition.
New to the TAD family of Compression Drivers is the TD-2002. This newly designed 1" Throat driver is also based upon the very successful Model TD-2001 which has been the mainstay in the professional sound industry for this size driver.
The TD-4001 successfully achieves all the design objectives we set forth - very high efficiency, wide and perfectly flat response from 600Hz to 20kHz, and low distortion. DIAPHRAGM The TD-4001 employs a pure beryllium diaphragm 3-15/16 inches (100mm) across.
What makes the TD-4002 from TAD (Technical Audio Devices) so well suited for professional applications is its wide 600Hz to 20kHz frequency response and high 110dB/W output efficiency. There's more of course.
New to the TAD family of Compression Drivers is the TD-4003 which has been newly developed building on the many key design success's found in the TD-4001 and TD-4002 Drivers. The results of this engineering feat is a product of improved clarity with a linear response over a wide frequency range of 600Hz to 20,000Hz at an SPL of 112dB per Watt at 1 Meter.
The TL-1601a is a low-frequency loudspeaker conforming to the very highest technical standards. It is specifically designed to reduce all forms of distortion and coloration to a bare minimum.VOICE COIL The TL-1601a employs an edgewise-wound long-travel type voice coil.
The TL-1601b has many of the traits of the TL-1601b -such as low distortion and low coloration. But it has the added advantage of an eminently high input power of 500 watts. The unit is designed for professional applications including digital-recording monitoring systems and sound reinforcement systems for synthesizer music.
Designed specifically to handle the increased average power that today's amplifiers deliver. In terms of sound, emphasis is placed on low distortion and low coloration.VOICE COIL A high maximum input of 500 watts is achieved through the use of an edgewise-wound, long-travel voice coil.
The TL-1801 from TAD (Technical Audio Devices) is a low-frequency loudspeaker featuring an 18-inch (460mm) driver.It features a high power maximum capacity of 800W thanks to the combined use of a 100mm diameter x 23mm winding depth, edgewise-wound, oxygen-free copper voice coil, a ferrite magnetic circuit with a high flux density of 11,200G, a lightweight transducer system using a cone made of highly rigid pulp and Kevlar fibers, and an advanced heat radiation design.
Where to buy TAD Speakers
All TAD Speakers are distributed worldwide by: Pioneer Electronics (USA) Inc. Service Support Division 1925 E. Dominguez Street Long Beach, CA 90810 USA tadpioneer@pioneerservice.com Fax: +1 (310) 952-2247
Find a store
